ZKSJ
ZKSJ Low Noise Aquarium Submersible Pump | 400L-12000L Flow, Variable Frequency, Household Circulation
ZKSJ Low Noise Aquarium Submersible Pump | 400L-12000L Flow, Variable Frequency, Household Circulation
Couldn't load pickup availability
Brightest spot
DC pump with wave mode
Separate control
Silent
Low consumption
Small body with a big flow
High pressure
Two years Warranty
Features
1. With three modes, Steady flow rate Mode (20 Levels),Wave Mode ,and Feed Mode, the output power could be adjusted to match different sizes of fish tanks.
2. Use SIX-Pole Intelligent DC three-phase driver (without sensor),
3. Low voltage(DC24V) operatio ,Safe, Long life expectancy,, and low noise.
4.With Ceramic shaft & carbon fiber shaft sleeve ensureure the motor’s long expectancy.
5.The input voltage if adapter is widely from AC100 to AC240V/60Hz) which can be suitable for many countries
6. Suitable for both fresh water andSaltwaterr
Instructions (How To Use)
Steady flow Mode(20 levels)：
The pump will work in this mode when powered on. Youu can change the speed by the kef “speed” When the indicator screen shows the number “101”, that means you havechosene the lowest flow rate, when the indicator screen shows the number “120”, that means mathe ximum flow rate.
Wave making Mode(20 levels)：
The wave is generated by changing the flow rate(from starting flow to max flow), and it requires two settings: starting flow and Wavelength.
1). Starting Flow :Before working in wave mode, you should adjust the starting flow(Mode 1toto minimum 103 (the starting flow of 500L/H), 110 the starting flow 1500L/H.Maximum starting flow 115(3500L/H)
2). Wave length h:Afthe setting mode 1, press the key of “mode” into mode 2(wave mode , and the press speed to change the wave length(20 levels).
Feed mode:
Press the key “Feed” till the indicator screen shows the number “410”. When the number “410” comes out, that means you have chosen Feed Mode successfully. And then the wave maker will stop working for your feeding fishes.Meantime, the indicator screen starts the countdown when it shows the number“410”. The countdown is 10 minutes. When the screen shows the number “400”, that means the count down is over and the wave maker restarts its working
